99.95% Purity Molybdenum Wire Surface Polished Wires With Diameter 0.04 to 2.0mm

Molybdenum wire is a key part for Monocrystalline Silicon growing furnace application, it has higher creep resistance,thermal stability  and better ductility after high-temperature use.Our minimum diameter of moly wire is 0.04mm 

Due to its high abrasion and wear resistance, molybdenum has become an indispensable material for metal spraying technology. Thin layers of molybdenum are sprayed thermically on surfaces of mechanically strongly stressed automobile parts, such as piston rings, synchronizer rings, shift elements, to increase their abrasion resistance. 
Furthermore, molybdenum wire is applied as an intermediate layer in the case of repairs of machine parts, such as bearing shells and shafts, because of the lacking adhesion of steel layers to steel without intermediate molybdenum layers.

Specifications of Polished Molybdenum Wires:

Purity: 99.95% min
Density: 10.2g/cm
Size: Dia 0.04mm - 2.0mm.
Melting point: 2625 degree.
Working temperature: 1700 degree.
Recrystallization: Starting temperature ≥ 850degree.
Tensile strength ≥ 800N/mm2

Molybdenum Wire Application:

1. Molybdenum wire(spray moly wire)is mainly used for auto parts spraying,such as piston ring,synchronizer rings,shift elements,etc.Molybdenum spray wire is also used in repairs of machine parts,such as bearing,bearing shells,shafts,etc.

2. Molybdenum wire for wire-cutting application is characteristic in high tensile strength,good electric discharge,smooth finish,high cutting speed,long life and etc.

3. It is also used as electric light source parts,high temperature and heating elements,etc.

Molybdenum Wire Advantage:

1. Molybdenum wire high pricision,line diameter tolerance control at less than 0 to 0.002mm
2. The ratio of breaking wire low,processing rate is high,good performance and good price.
3. Can finish the stable long time continuous processing.

The Purity of Molybdenum Wire:

Sizes and Tolerance of Molybdenum Wire:

Picture Show: