Purity 99.95 Spraying Molybdenum Rod Thermal Spraying Rods 1.6mm / 2.3mm / 3.2mm

Due to its high abrasion and wear resistance, molybdenum has become an indispensable material for metal spraying technology. Thin molybdenum layers are sprayed thermically on surfaces of mechanically strongly stressed automobile parts to increase their abrasion resistance. 

Molybdenum Rod for Thermal Spraying is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc. 
Molybdenum spraying rod is also sprayed onto machine parts such as bearing for repair purposes.

Furthermore, molybdenum spray rod is applied as an intermediate layer in the case of repairs of machine parts, such as bearing shells and shafts, because of the lacking adhesion of steel layers to steel without intermediate molybdenum layers.

Molybdenum Spraying Rods Description:
 
Composition: Mo>99. 95% , impurities <0. 05% , each element content <0. 01%
Appearance: Molybdenum spraying rod is covered with graphite. After removed graphite, it is metallic luster.

Molybdenum Spraying Rod Properties: 

1. Unit weight up to 25kg without any welded joint, which results in enhancing the efficiency and decreasing the operating costs. 
2. Diameter: 1.6mm, 2.3mm, 3.2mm and other customized sizes 
3. Tolerance: 3. 175mm + / -0. 025mm or + 0 / -0. 05mm 
                 2. 3mm-1. 45mm + / -0. 02mm + 0 / -0. 05mm 
4. Tensile strength: >800N / mm2 
5. Elongation: >20-5%

Applications of Molybdenum Rod for Thermal Spraying:

Molybdenum rod is mainly used for auto parts spraying,such as piston ring,synchronizer rings,shift elements,etc.Molybdenum spray rod is also used in repairs of machine parts,such as bearing,bearing shells,shafts,etc

Composition of Molybdenum Rods:

Note: Wire with custom-made sizes and surface is also available.

Delivery Status of Molybdenum Rods for Spray:

Package of Moly Spray Rods: