Molybdenum TZM Alloy Sheets Molybdenum Alloy Sheets for Vacuum Furnace 1 - 100mm AIA-1 manufacturer from China Hubei Fotma Machinery Co., Ltd.

Molybdenum TZM Alloy Sheets Molybdenum Alloy Sheets for Vacuum Furnace 1 - 100mm

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

Molybdenum TZM Alloy Sheets Molybdenum Alloy Sheets for Vacuum Furnace

TZM alloy has a higher recrys

Molybdenum TZM Alloy Sheets Molybdenum Alloy Sheets for Vacuum Furnace

TZM alloy has a higher recrystallization temperature, higher strength, hardness and good ductility at room and elevated temperatures than pure molybdenum. TZM alloy offers twice the strength of pure moly at temperatures over 1300'C. The recrystallization temperature of TZM is approximately 250'C higher than moly and it offers better weldability. In addition, TZM exhibits good thermal conductivity, low vapor pressure, and good corrosion resistance and is machinable.

Brief Introducstion of TZM Alloy Sheets:

Composition: Ti: 0.4-0.55% Zr: 0.06-0.08%, Mo:99.2% to 99.5% C: 0.01-0.04%

Purity: Mo ≥99.20%
Density: ≥10.10g/cm3
Appearance: It`s black brown, and will turn to a silver metallic luster after alkali-washing
Application: Used in high-temperature vacuum and hydrogen-atmosphere furnace construction.

Physical performance of TZM alloy and Pure Molybdenum:

Material	Density /g·cm-3	Mealting Point /	Boiling /
TZM Alloy(Ti0.5/Zr0.1)	10.22	2617	4612
Mo	10.29	2610	5560

Mechenical Properties of TZM Alloy (Ti0.5/Zr0.1)

Mechenical Properties

Elongation

Modulus of elasticity /GPa

Yield Strength

/MPa

Tensile Strength

/MPa

Fracture toughness

/(MP·m1/2)

Data

<20

320

560~1150

685

5.8~29.6

Sizes of TZM Alloy Sheets:

Thickness (mm)	Width (mm)	Length (mm)
0.51~0.70(±0.04)	50~600(±3) (Y, M)	50~500(±4)
0.71~1.0(±0.05)	50~600(±3) (Y, M)	50~500(±4)
1.01~1.20(±0.06)	50~600(±2) (Y, M)	50~500(±5)
1.20~2.0(±0.08)	50~500(±5) (R, M)	50~500(±5)
2.01~3.0(±0.08)	50~500(±5) (R, M)	50~500(±5)
3.01~4.0(±0.10)	50~500(±5) (R, M)	50~500(±5)
≥4.01(±0.12)	50~500(±5) (R, M)	50~500(±5)
Notice: 1. CONDITION: Y=Cold Rolled; M=Stress Relieving annealed; R=Hot Rolled